I snapped some pictures of the underside of the dishwasher since I had it disconnected and upside down. It is pretty ingenious how the pump housing is made so that it serves as two pumps depending on which direction the motor is turning. The dishwasher seems to be designed to use as few parts as possible, and for the most part, there isn’t much to go wrong with it. There is a diaphragm that seals the drain outlet when pressurized by recirc water, and moves out of the way when in drain mode. This diaphragm was torn, so water diverted into the drain chamber just reentered the recirc chamber.
Subscribe to Blog via Email
Recent Comments
- Tw on DIY Automatic Transfer Switch
- Arby Arbutina on Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- Algorithm Is The New Rhetoric - Victory Girls Blog on The Legacy of Andrew Breitbart
- Ian on Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- Ray Cook on Private RoIP (Radio over IP) System
Top Posts
- Razor Dune Buggy w/ 500w motor, 36v battery
- Private RoIP (Radio over IP) System
- Trick to Activate Windows XP
- Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- Quadrasteer / Dana 60 Axle Differences and Similarities
- Time Average in Ladder Logic (ControlLogix AOI)
- Poem to Mom (Mean Old Mother)
- Why Liberals Hate Conservatives
- 2012 GOP Texas Parliamentary Motions Chart
- Fastenal Vending Machine
Resume
Bookmarks
Archives
Categories
-
Recent Posts
Meta