I used these cool rubber mounts to keep my fancy new 3 watt LED Maglight secure and in an easy to retrieve location. I wanted to mount in to the side of the seat, but there just wasn’t enough room, so I put it on the lower dash, where it will crush my knees if I’m ever in a serious accident.
I choose the quick fist instead of the standard Maglight mounts because I was afraid that the hard plastic used in the Maglight brand would break if I ever dropped something on it or hit it with a boot or something.
Subscribe to Blog via Email
Recent Comments
- Tw on DIY Automatic Transfer Switch
- Arby Arbutina on Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- Algorithm Is The New Rhetoric - Victory Girls Blog on The Legacy of Andrew Breitbart
- Ian on Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- Ray Cook on Private RoIP (Radio over IP) System
Top Posts
- Wiring Schematic for Bad Boy ZTE Mower
- Private RoIP (Radio over IP) System
- Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- Troy Bilt Chipper Shredder Review
- Debounce Code for Logix 5000
- Quadrasteer / Dana 60 Axle Differences and Similarities
- Raspberry Pi Data to Google Sheets
- Time Average in Ladder Logic (ControlLogix AOI)
- 12 Ton Shop Press
- HMI Screen - WIP Tanks
Resume
Bookmarks
Archives
Categories
-
Recent Posts
Meta