I managed to get the TinyTrackerII soldered together earlier in the week, and tonight I started testing it. I had to wire up a TTL to RS232 converter to get it to talk with my laptop. I was able to configure the parameters, but haven’t set the audio levels with the radio interface yet. I also powered up the $17 GPS receiver, and it is spitting out NMEA serial data as it should. My GPS antenna seems to have been delivered to the wrong place, so I still don’t have it.
Subscribe to Blog via Email
Recent Comments
- Tw on DIY Automatic Transfer Switch
- Arby Arbutina on Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- Algorithm Is The New Rhetoric - Victory Girls Blog on The Legacy of Andrew Breitbart
- Ian on Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- Ray Cook on Private RoIP (Radio over IP) System
Top Posts
- Private RoIP (Radio over IP) System
- Wiring Schematic for Bad Boy ZTE Mower
- Debounce Code for Logix 5000
- Quadrasteer / Dana 60 Axle Differences and Similarities
- Raspberry Pi Data to Google Sheets
- Quadrasteer / Dana 60 Rebuild How-To (ring, pinion, carrier replacement)
- The Legacy of Andrew Breitbart
- HMI Screen - WIP Tanks
- Troy Bilt Chipper Shredder Review
- Convert Unsigned Integer to Float
Resume
Bookmarks
Archives
Categories
-
Recent Posts
-
Meta
